8th International Conference on Materials Science and Technology MSAT-8 - Home

Home

2014-02-17T02:21:48+00:00

Last Updated: December 26, 2014.

Abstract book and Program [pdf] update!

InININInternational Conference on Materials Science and Technology (MSAT) is recognized as one of the major series of conference in materials science, technology & engineering. The bi-annual conferences strive to be a premier international multidisciplinary conference providing an arena for all stakeholders from academics, researchers, industrial leaders and regulatory experts to share their latest research findings, to discuss novel applications and to identify the challenges that lie at the frontier of materials science.

For the first time, the 8th International Conference on Materials Science and Technology (MSAT-8) will be held in parallel with the 8^th Thailand Metallurgy Conference (TMETC-8) to broaden the horizon of materials science and 2 special sessions called “Thailand-Japan Polymer Initiative” and "Tribology Technical Session" in cluding the annual meetings of Thai Tribology Association (TTA) and Thai Corrosion of Metals and Materials Association (TCMA). This event presents simple opportunities for participants to explore future collaborative activities and to network with their peers.

Organized by Supported by

Co-organized by

Sponsors & Exhibitors

Gold Sponsors

Silver Sponsors

Bronze Sponsors

Exhibitors

Presenter Information

2014-09-30T18:15:28+00:00

ORAL PRESENTATIONS

Presentation Time
Oral presenters will have 15 minutes (12 min talk + 3 min Q&A) for regular presentations, 30 minutes (25 min talk + 5 min Q&A) for invited presentations and 45 minutes (35 min talk + 10 min Q&A) for plenary presentations.

Available Audio Visual Equipment
Each presentation room will be equipped with a notebook connected to LCD projector, laser pointer and microphone. If you require other audio visual equipments, please contact conference secretariat (Tel: +662 564 6500 ext.4675-4680, E-mail: conferences@mtec.or.th before October 31, 2014.

Presentation Files
Please bring your presentation file (MS PowerPoint and PDF) stored in a standard media (USB or CD-ROM) to the MSAT-8 staff in your presentation room during breaks prior to your presentation. Our staff will assist you to load your file on the conference computer. For those who wish to use their own notebook computers, please verify the compatibility before their sessions.

Please note that our notebook will operate by Window 7 and be composed by MS Office 2010, VLC Player, Kcodec, Acrobat Reader, Winzip, IZarc and Xnview etc.

Presenter Registration
All presenters are required to register for the conference by October 24, 2014 to ensure that their abstracts will be included in the final program and the conference abstract book.

Language
Please be advised that both oral & poster presentations must be conducted in English only.

POSTER PRESENTATIONS
(Certificates will be given for the categories of the best poster presentations)

Poster Guideline

The complete text of your presentation can be found in the abstract book. Please post only the essentials. Restrict yourself to authors’ names, title of presentation, an abstract and materials such as graphs, charts, tables and photographs that are necessary to communicate effectively the research findings to the audience.

Poster Size
A poster will be mounted on a PVC board with display space of 90 cm (width) x 120 cm (height). The recommended poster size is A0 (841 mm x 1189 mm). All posters must be in English.

Poster Area
Poster sessions will be held at the foyer of the 2^nd and 3^rd floor of Swissotel le concorde, Ratchadapisek Rd. Bangkok.

Poster Installation and Removal (To be confirmed)

	Date	Time
Installation	Monday, December 15, 2014	07:30 AM – 08:45 AM
Removal	Tuesday, December 16, 2014	04:00 PM – 06:00 PM

The display boards will be arranged in session groups, and each poster will be identified by a poster number assigned to each presentation according to the conference program. Poster presenters are responsible for mounting and removing their posters themselves. Conference organizer will provide Velcro for attaching posters to the display panels.

Presentation Time (To be confirmed)
Posters will be on display from 09:00 AM on December 15^th to 04:00 PM on December 16^th. Poster presenters are required to stand by their posters during the poster presentations or coffee breaks to anticipate discussion with participants and the judges. There will be no audio-visual equipment for Poster Sessions.

Notification of Paper Acceptance

2014-09-30T02:30:00+00:00

To view the paper acceptance status, please login to our conference management sytem using your username and password you used when submitting your abstract.

All authors whose paper has been accepted with minor revision or conditionally accepted with major revision, will have an opportunity to modify their papers in response to the reviewer's comments. Please submit their revised paper through our conference system no later than October 15, 2014.

Upload Your Revised Paper

In conference management system, go to "My Abstract/Paper" and click on the link under "Revised Paper".

Your paper presentation schedule will be posted on the conference website as it becomes available.

Required Author Registration

To be published in the MSAT-8 Abstract Book, an author of an accepted paper is required to register for the conference by as the presenter and the paper must be presented at the conference. Author registration and payment must be completed by October 24, 2014. (Please note that early bird registration will end this month on October 31, 2014)

Online registration is available now.

Full Paper Submission Information

Author of all accepted abstracts have an option to submit their full papers in order to be considered for any special journal issues in The Key Engineering Materials. The full paper submissions will go through a regular paper review procedure consistent with the journal standard.

Full paper submission period start from November 1, 2014 to January 4, 2015 by Online.

Tribology Technical Session

2014-09-07T21:43:22+00:00

1st Thai Tribology Association Annual Conference and Exhibition
Monday, December 15, 2014 @ Swissotel Le Concorde, Bangkok, Thailand

Organized by
National Metal and Materials Technology Center (MTEC)
Thai Tribology Association (TTA)

Introduction
Tribological technology is critical for increasing material life, optimizing process performance, reducing waste and energy, and minimizing cost. Despite its tremendous contribution, Tribology attracts little attention from the manufacturing industry in Thailand. As a result, Thai Tribology Association (TTA) has been established in order to raise industry recognition of Tribology and acts as an important bridge between industry and academic research. Our mission is to promote, develop, innovate and transfer research and development in advanced Tribology technology to Thai manufacturing industry through collaborations with top-rated experts and research institutes. TTA consists of top-rated domestic researchers and collaborates with the international experts in Tribology. Particularly, TTA is connected with The International Research Group of Tribology in Manufacturing (IRGTM), which is a global network of Tribologists.

Thai Tribology Association or TTA is the national leader of advanced Tribology employing toprated researchers, promoting leading-edge research activities, and maintaining strong partnerships with Thai manufacturing industry. TTA strongly believes that advanced technology (knowledge and know-how) and innovation (novel products, processes, and applications) in Tribology will be crucial in the sustainable growth of Thai manufacturing industry. TTA is a central resource for advanced technology and innovation in Tribology for Thai manufacturing industry and expands industrial partners for technology enhancement and innovation. TTA provides a variety of supports and activities that Thai manufacturing industry can benefit from. There are three main activities that are the focus of TTA: (1) research and development, (2) knowledge and skills development, and (3) network development.

At MSAT-8, TTA will have an annual conference and exhibition providing information and activities of TTA. TTA will also receive a great honor from Prof. Kuniaki Dohda, President of IRGTM to introduce future activities between TTA and IRGTM. In addition, the keynote lecture on "Active Control of Boundary Lubrication" will be presented by Prof. Meng Yonggang (Tsinghua University, China).

Schedule (Updated on Nov. 20, 2014)
09:00 – 09:15     Opening Ceremony
09:15 – 10:00     Plenary Lecture 1 on “10 Global Materials Science and Engineering Trends”
                           by Prof. Dr.-Ing. Thomas Böllinghaus,Germany
10:00 – 10:45     Plenary Lecture 2 on “New Technology for Carbon Neutral Energy”
                           by Prof. Dr. Tatsumi Ishihara, Kyushu University, Japan
10:45 – 11:00     Refreshment
11:00 – 11:05     Opening Speech by Assoc. Prof. Siriluck Nivitchanyong (TTA President)
11:05 – 11:10     Introduction of TTA International Academic Advisory Board
                           by Prof. Kuniaki Dohda (TTA Chair of International Academic Advisory Board)
11:10 – 12:00     Keynote Lecture on “Active Control of Boundary Lubrication” by Prof. Meng Yonggang, China
12:00 – 13:00     Lunch
13:00 – 13:30     Technical Session 1 on “TTA and its role in mobilizing Thai industry"
                           by Dr. Numpon Mahayotsanun (TTA Vice President)
13:30 – 14:15     Technical Session 2 on “Tribology R&D Activities in Thailand
                           by Assoc. Prof. Varunee Premanond (TTA Lubrication Division Head)
14:15 – 14:45     Networking with TTA members and New Members Recruitment
14:45 – 15:00     Refreshment
15:00 – 16:00     Forum (in English): “Tribology Technology in Thai Manufacturing Industry”
           Chair by Asst. Prof. Numpon Mahayotsanun
                                1. Dr. Hideyuku Kuwahara, Thai Parkerizing Co., Ltd.
                                2. Mr. Watcharapol Trisantikul, PTT Public Company Limited
                                3. Mr. Takeshi Hashimoto, Fujilloy (Thailand) Co., Ltd.
                                4. A representative from Honda R&D

16:00 – 17:00     TTA Annual Meeting (Invited Only)

Registration Fee & Payment: Early bird rate: 1,200 THB / seat
Normal rate (After Dec. 7, 2014): 1,500 THB / seat

FREE for MSAT-8 & TMETC-8 Participants

Remarks:

All fees are in THB inclusive of 7% VAT.
Registration fee includes access to this session, exhibitions, lunches & refreshment.
National Metal and Materials Technology Center (MTEC) is a government organization with 3% withholding tax exemption.

Payment Method

Bank tranfers should be made to the saving account below. A copy of the receipt of the bank remittance should be sent to Mr. Peerapong Pinwanich by e-mail:peerapp@mtec.or.th or fax no. 02-564-6505

     Account Name: National Metal and Materials Technology Center
     Account Number: 080-0-000846
     Bank Name: BANGKOK BANK PLC.
     Swift Code: BKKBTHBK

Registration Confirmation: An automatic confirmation e-mail will be sent to you upon completion of registration.

Cancellation and Refund Policy
Cancellations before November 30, 2014 will receive full refund minus a 25% of a fee as an administrative charge. Cancellations later than November 30, 2014 will not receive any refund. Notification of cancellation must be received in writing by e-mail or fax. Only cancellations made in writing are acceptable.

Contact:
Human Resources Development for Materials Science (Mr. Peerapong Pinwanich)
National Metal and Materials Technology Center (MTEC)
114 Thailand Science Park, Phahonyothin Rd., Klong 1, Klogn Luang, Pathumthani 12120, Thailand
Telephone number: +66=2564-6500 ext. 4680 Fax number: +66-2564-6505
E-mail: peerapp@mtec.or.th